Officeline

Höganäs. Tailored for you.

An individually assembled chair with an uncompromising ergonomic approach to every detail.

Officeline

20.736 possibilities. Your body decides.

  • Backrests

    Höganäs offers eight different backs. All supports your back regardless of posture – upright, stretching out, sitting in balance or reclining.

  • Seats

    There are four different seat types with a distinct downward curve at the front. Most of the area is quite flat to facilitate changes of posture.

  • Gas lifts

    The chair is available in three different height intervals together with recommended accessories, depending on whether you have long or short legs.

  • Neck rests

    Good support for your neck and head while leaning back to rest. Höganäs have three different types of neck rests that adapts very well to your posture.

  • Accessories

    Besides a good foundation, Höganäs provides options for all types of sitting. Find accessories for arms, legs, feet and also back-up for your lower back.

Individual spines require

Individual backrests

The backrest is mounted on a pivot. This is a very important design feature because it allows the backrest to conform to the movement of your body and support your back regardless of posture – upright, stretching out, sitting in balance or reclining.

Height: 36 cm, width: 40 cm.

This is the obvious choice if you need a good and ergonomic chair in a more compact format. These models are ideally suited to reception areas and checkout counters, the traditional office desk and for teachers in classrooms. The backs’ compact design also means that anyone in need of a smaller chair can easily find a good and fully ergonomic alternative that is ideally suited to an active working environment.

Height: 46 cm, width: 41 cm. Height: 46 cm, width: 38 cm.

This is one of the most popular and best-selling backs. It provides all the ergonomic properties and the comfort level an office chair should possess. It is also possible to choose a durable edge trim that protects the fabric from wear and tear. The range of fabrics available for upholstering provides you with the possibility of combining ergonomics and design into your entirely personal office chair.

A slightly slimmer variant of the same popular and best-selling back. It provides all the ergonomic properties and the comfort level an office chair should possess. It is also possible to choose a durable edge trim that protects the fabric from wear and tear. The range of fabrics available for upholstering provides you with the possibility of combining ergonomics and design into your entirely personal office chair.

Height: 54 cm, width: 41 cm. Height: 54 cm, width: 38 cm. Height: 54 cm, width: 41 cm. Height: 54 cm, width: 38 cm.

This is one of the most popular and best-selling backs. It is 8 cm taller then +361/+361S and also provides all the ergonomic properties and the comfort level an office chair should possess. It is also possible to choose a durable edge trim that protects the fabric from wear and tear. The range of fabrics available for upholstering provides you with the possibility of combining ergonomics and design into your entirely personal office chair.

A slightly slimmer variant of the same popular and best-selling back. It provides all the ergonomic properties and the comfort level an office chair should possess. It is also possible to choose a durable edge trim that protects the fabric from wear and tear. The range of fabrics available for upholstering provides you with the possibility of combining ergonomics and design into your entirely personal office chair.

This is the same popular and best-selling back but without a plastic cover on the backside. It provides all the ergonomic properties and the comfort level an office chair should possess. It is also possible to choose a durable edge trim that protects the fabric from wear and tear. The range of fabrics available for upholstering provides you with the possibility of combining ergonomics and design into your entirely personal office chair.

The same back as +382 but with a slightly slimmer width. It provides all the ergonomic properties and the comfort level an office chair should possess. It is also possible to choose a durable edge trim that protects the fabric from wear and tear. The range of fabrics available for upholstering provides you with the possibility of combining ergonomics and design into your entirely personal office chair.

Height: 41 cm, width: 44 cm.

An extra high level of comfort. The somewhat more spacious design is of course ideal if you are in need of a slightly larger chair. The range of fabrics available for upholstering provides you with the possibility of combining ergonomics and design into your entirely personal office chair.

The same extra high level of comfort but without a plastic cover on the backside. The somewhat more spacious design is of course ideal if you are in need of a slightly larger chair. The range of fabrics available for upholstering provides you with the possibility of combining ergonomics and design into your entirely personal office chair.

Height: 53 cm, width: 42 cm.

12 cm taller and 2 cm slimmer then +401/+402. These models are particularly appreciated at workplaces that require long periods of sitting. The range of fabrics available for upholstering provides you with the possibility of combining ergonomics and design into your entirely personal office chair.

Same size as +501 but without plastic cover on the backside. These models are particularly appreciated at workplaces that require long periods of sitting. The range of fabrics available for upholstering provides you with the possibility of combining ergonomics and design into your entirely personal office chair.

Height: 54 cm, width: 44 cm.

This back is similar in appearance to the +361/+381 models, but comes with a somewhat more generous padding and is a bit more spacious. Suitable for the same work situations, but designed for people looking for that little bit of extra comfort, luxury and to anyone who needs to sit for long periods at a time. The amount of padding provided is generous but still provides good support for active work. The range of fabrics available for upholstering provides you with the possibility of combining ergonomics and design into your entirely personal office chair.

The same back as +561 but without a plastic cover on the backside. Suitable for the same work situations, but designed for people looking for that little bit of extra comfort, luxury and to anyone who needs to sit for long periods at a time. The amount of padding provided is generous but still provides good support for active work. The range of fabrics available for upholstering provides you with the possibility of combining ergonomics and design into your entirely personal office chair.

Individual sitting require

Individual seats

The seat is built up on a stout base of moulded plywood with a distinct downward curve at the front. Most of the area is quite flat to facilitate changes of posture, but a slight curvature near the edges enhances comfort and the feeling that you are sitting securely.

Slim

Depth: 47, width: 40.

The narrow seat has all the properties of our standard seat but it gives the chair a slimmer and neater look. Ideal for individuals that needs a narrow seat arrangement.

Standard

Depth: 47, width: 43.

Our standard seat is designed to fit the majority of people. With its flat surface to facilitate changes of posture and curvature near the edges it provides that extra bit of comfort needed. For those who require it, it may also be equipped with 20 mm extra padding of memory foam.

T-seat option available

Deep

Depth: 49, width: 43.

The deep seat has the same width as our standard seat but has an increased depth of 20 mm. This is ideal for tall or big boned individuals that have high requirements for comfort and cushion.

Wide

Depth: 49, width: 46.

The wide seat has the same width as our deep seat but has an increased width of 30 mm. This is ideal for large or big boned individuals that have high requirements for comfort and cushion.

Individual height require

Individual gas lifts

The chair is available in three different height intervals, depending on whether you have long or short legs.

SEAT HEIGHT 42-57 cm

Type 1

Standard

This gas spring comes as standard with each chair. It is suitable for most people and type of sitting. A very good all-round gas spring.

SEAT HEIGHT 45-64 cm

Type 2

High

Recommended if you need a higher sitting. It also fits well with our foot ring option.

SEAT HEIGHT 51-73 cm

Type 3

Extra high.

This option is recommended if you need a very high chair. A perfect choice combined with our foot ring.

Individual necks require

Individual neck rests

The neck rest is adjustable 15 cm in height and 5 cm in depth. Its rounded, curved shape is designed to give proper support to your neck when you are reclining. We have three different types of neck rests that adapts very well to your posture and type of sitting.

Standard

Fits most types of reclining.

his neck rest comes as standard with each chair. Fits most types of reclining and gives a very good support for neck and head. Upholstered in fabric or leather.

Extended

Extended 4cm.

Protrudes support closer to the back of the head. For a better posture depending on the curve of the upper part of the spine. Upholstered in fabric or leather.

Curved

Extra curved neckrest

For better stability and support sideways this extra curved neck rest is the recommended choice. Upholstered in fabric.

Individual chairs require

Individual accessories

A chair that is

Ergonomic for real

We have two chair mechanisms – Duomatic without a tilt function and Multimatic with a tilt function. Both make it possible to sit in a flexible and varied manner. It is never good to sit still for a long period of time, and you should take the opportunity to move your body and change your sitting position as often as you can. Lean backwards, sit upright, stretch out or raise the chair and let the seat tilt forwards so that you achieve an upright and balanced sitting position. Another useful tip is to stand up for a while.

Sitting upright

This is the starting point when you want to find a basic setting for your chair. You simply adjust the seat height, seat depth and armrests so that you achieve a proper and comfortable amount of support when you are working. It is also important to adjust the level of resistance in the tilt function so that you receive plenty of support for your back but without feeling that the chair rocks backwards or that the tilting motion requires too much effort on your part.

Reclining

Höganäs has a chair mechanism with three balance axes, which makes it possible for you to sit fully outstretched while leaning backwards and yet still receive complete support for your back without needing to lift your feet from the ground.  This allows you to “open up” your body and facilitate your breathing and blood circulation.

Stretching out

You can stretch out while sitting whenever you feel like it. The balance axes ensure that the seat tilts forwards at the same time as the backrest tilts backwards; a position that is comfortable for you and which continues to provide complete support for your back.

Sitting in balance

In order to vary your sitting position, raise the seat height until your pelvis starts to rotate forwards and you feel that you can sit with a straight back without any effort. The height you choose is entirely a matter of individual preference. Some people get the feeling of sitting in balance after raising the seat by only 5 to 10 cm, while others need to raise the seat further. The most important thing is that you are able to pull your legs in under the chair and that the sitting position feels natural.

Founded in 1957

Tradition and knowledge

Höganäs is a product family at Officeline based on the original traditions of the classic Höganäsmöbler furniture company, one of the oldest furniture manufacturers in Sweden. Höganäsmöbler is a family company that was founded in 1957 and that started to manufacture high-quality office chairs in 1975. Since that time, ergonomics has always been a central feature of the manufacturing process and of the development of the chairs.

By working in close cooperation through the years with orthopaedists, ergonomists and physiotherapists, all experts in their respective fields, Höganäsmöbler has defined the basis for creating functional and well-made office chairs that cater for healthy sitting habits. These strengths, together with a strong sense of commitment to the environment, have made Höganäsmöbler the perfect addition to Officeline. Since Officeline completed the acquisition of Höganäsmöbler in 2010, we are proud to have been able to expand the business with new comprehensive production capabilities in the factory premises in Höganäs in western Skåne in the south of Sweden. The knowledge that has been passed from generation to generation at Höganäs is now bound together with our own knowledge here at Officeline and will enable us to develop and build even better office chairs in the future.

The Höganäs range of office chairs is based on models from Höganäsmöbler’s product range, a comprehensive range of chairs built entirely from an ergonomic viewpoint.

Order your own Höganäs

Please contact us to get more information such as pricing and delivery dates. We are very glad to answer all the questions you might have or assist you with further ergonomic details.

+46-8-556 119 00
info@officeline.se
Continue to officeline.se